Related Experiment Video
Updated: Jun 17, 2026

Automated Hydrophobic Interaction Chromatography Column Selection for Use in Protein Purification
Published on: September 21, 2011
Intermittent simulated moving bed chromatography: 1. Design criteria and cyclic steady-state
Shigeharu Katsuo1, Marco Mazzotti
1Institute of Process Engineering, ETH Zurich, Sonneggstrasse 3, CH-8092 Zurich, Switzerland.
Abstract:
The intermittent SMB (I-SMB) process is a multi-column chromatographic process, which is a modification of the conventional SMB process, has been applied so far only in the sugar industry and is claimed to achieve higher productivity. In the I-SMB process the time interval between two port switches is divided in two sub-intervals, and only during the first the product streams are collected. The potential of the I-SMB technology is demonstrated in the case of the separation of a binary mixture subject to the linear isotherm by using both the equilibrium theory of chromatography and detailed simulations. It is shown that a I-SMB with only four columns can achieve much higher separation performance than a SMB unit with four columns.
Related Concept Videos
High-Performance Liquid Chromatography: Elution Process
Ion-Exchange Chromatography
Chromatography: Introduction
The phase in which the compounds linger or on which the compounds adsorb is called the stationary phase, whereas the mobile phase is the solvent that carries the solutes to be analyzed. In traditional column chromatography, the mixture flows through the stationary phase, and the compounds partition between the stationary and mobile phases...
High-Performance Liquid Chromatography: Introduction
In HPLC, two phases play a critical role in the separation process:
Chromatographic Methods: Classification
Chromatographic techniques are typically named by...
Optimizing Chromatographic Separations
Band broadening refers to spreading solute bands as they travel through the column. This broadening can impact resolution. Plate height (H) represents the length required for one theoretical plate. A lower plate height corresponds to...

