Related Experiment Video
Updated: Jun 17, 2026

Preparation of Biomass-based Mesoporous Carbon with Higher Nitrogen-/Oxygen-chelating Adsorption for Cu(II) Through Microwave Pre-Pyrolysis
Published on: February 12, 2019
Removal of copper from aqueous solution by carbon nanotube/calcium alginate composites
Yanhui Li1, Fuqiang Liu, Bing Xia
1Laboratory of Fiber Materials and Modern Textile, The Growing Base for State Key Laboratory, Qingdao University, 308 Ningxia Road, Qingdao 266071, China. liyanhui@tsinghua.org.cn
Abstract:
With bulk production and increasing application of carbon nanotubes (CNTs) as adsorbents in wastewater treatment, they will eventually be discharged into water environment and result in human contact risk to these toxic materials. However, so far few attentions have been paid to resolve the environmental micro-pollution caused by these micro-sized CNTs. In this research, an environmental friendly adsorbent, CNTs immobilized by calcium alginate (CNTs/CA) was prepared. Its copper adsorption properties were investigated via equilibrium studies. Experimental results showed that copper removal efficiency of CNTs/CA is high and reaches 69.9% even at a lower pH of 2.1. The copper adsorption capacity of CNTs/CA can attain 67.9 mg/g at copper equilibrium concentration of 5mg/L.
Related Concept Videos
Coagulation
Extraction: Advanced Methods
Microbial Leaching

