Related Experiment Video
Updated: Jun 16, 2026

Building Affordable, Durable, Medium-Fidelity Ballistic Gel Phantoms for Ultrasound-Guided Nerve Block Training
Published on: February 9, 2024
Colour contrast in ballistic gelatine
Christian Walter Albert Schyma1
1Institut für Rechtsmedizin der Universität Bonn, Forensic Medicine, Bonn, Germany. christian.schyma@ukb.uni-bonn.de
Abstract:
Gelatine is a reliable tissue simulant in wound ballistic experiments. The projectile penetrating the gelatine transfers energy and causes radial cracks according to the temporary cavity. Thus the crack length is a function of the energy spent in the medium. In practice the fissures are poorly contrasted for which reason an enhancement of contrast was searched. A series of six shoots with expanding bullets (9 mm x 19 Action-5, 9 mm x 19 Quick Defense 1, 5.56 mm x 45 Styx Action) was realized on 10% gelatine blocks at 4 degrees C temperature. Three blocks were marked with acryl paint on the front, three blocks were shot native. The blocks were cut in slices of 1cm thickness and optically scanned. The evaluation was performed according to Fackler's wound profile, the total crack length method and the polygon method. The paint was soaked into the block by the collapse of the temporary cavity and transported with diminishing intensity to the end of the trajectory. Colour contrast was successfully realized in all the shots which made easier to measure the length of the fissures. The comparison of the shots with and without paint gave a better reproducibility of measures with colour contrast. Using paint the energy transfer began earlier so that the curve of the wound profile was shifted by 1cm to the entry which is explicated by the paint pad put on the block. The maximum crack lengths did not significantly differ with and without paint. All evaluation methods profited from colour contrast but the total crack length method the most of all. Further experiments showed that colour contrast is also successful in 20% gelatine and is not dependent of the type of projectile.
Related Concept Videos
Two-dimensional Gel Electrophoresis
The first dimension separation uses the isoelectric focusing or IEF technique performed on immobilized pH gradient (IPG) strips that separate proteins according to their isoelectric points.
Biological samples, such as cells...
DNA Agarose Gel Electrophoresis
Gel extraction follows five major steps: running gel electrophoresis to separate fragments, isolating the individual bands, extracting DNA from those bands, and removing the dye and salts from the extracted mixture to obtain pure DNA.
In cloning experiments, both the insert and vector DNA...
SDS-PAGE
A variation of gel electrophoresis, termed polyacrylamide gel electrophoresis (PAGE), is commonly used for separating proteins according to their molecular size by passing them through a polyacrylamide gel. Because of the varying charges associated with amino acid side chains, PAGE can be used to separate intact proteins...

