A bright and long-pulse illumination for ultrahigh-speed microscopy of living specimens

Ultrahigh-speed microscopy of living specimens requires ultrabright illumination. Moreover, the duration of illumination should be sufficiently long, on the order of at least several tens of milliseconds, in order to investigate the dynamic state of living specimens. However, specimens are exposed to a high risk of damage by the intense illumination. The brightness and pulse duration of illumination have to be continuously controlled for use in the ultrahigh-speed microscopy of living specimens. Commercial or laboratory-made illumination systems do not satisfy the abovementioned requirements. In this paper, the development of a bright and long-pulse illumination system for ultrahigh-speed microscopy of living specimens is presented. A xenon flashlamp with an arc length of 1.5 mm has been used as the light source. The electrical power supply consists of a voltage-regulated circuit, a capacitor bank, and a control circuit including an insulated-gate bipolar transistor as a gating device, which provides a large rectangular current pulse with the duration in the range to the order of several tens of milliseconds. The brightness, pulse duration, and repetition rate can be easily and continuously controlled. The illumination developed in the present study is installed in an inverted fluorescence microscope equipped with a high-speed camera in order to evaluate the performance as an illumination source. A fluorescent image of the living spermatozoa of a mouse obtained at a frame rate of 8 kHz shows good contrast. Such an image cannot be obtained using a commercial illumination system.