Related Experiment Video
Updated: Jun 16, 2026

Alternative In Vitro Methods for the Determination of Viral Capsid Structural Integrity
Published on: November 16, 2017
Attachment of noroviruses to stainless steel and their inactivation, using household disinfectants
Maryline Girard1, Solange Ngazoa, Kirsten Mattison
1Institute of Nutraceuticals and Functional Foods, Université Laval, Québec, Québec, Canada G1V 0A6.
Abstract:
The aims of this study were (i) to evaluate the impact of pH and relative humidity on the attachment of norovirus (NoV) to fomites and (ii) to evaluate the effectiveness of different household disinfectants on NoV attached to fomites. Plaque assay and/or real-time reverse transcription PCR assay were used to determine the amount of murine and human NoV attached to stainless steel disks, i.e., the amount removed by sonication in elution buffer but not by surface rinses with water only. An enzymatic pretreatment was used for both human and murine NoV before the real-time reverse transcription PCR assay to avoid detection of RNA associated with inactivated virus. For both murine and human NoV, maximum attachment was obtained after a contact time of 10 min. Attachment of NoV to stainless steel does not appear to be affected by pH, although murine NoV was less attached (<2 log units) at pH 9 and at low relative humidity (25%) than was human NoV (3 log units). Sodium hypochlorite (3%) was the most effective disinfectant, producing a greater than 3-log reduction after 10 min compared with less than a 1-log reduction after treatment with quaternary ammonium compounds and ethoxylated alcohols. Murine NoV was more sensitive than human NoV to disinfectants by approximately 1 to 2 log units. These results will help improve strategies for decontaminating surfaces harboring NoV and thus reduce the incidence of illness caused by these pathogens in the food sector and domestic environments.
Related Concept Videos
Cleaning, Sterilization, and Disinfection
Cleaning
The cleaning process usually involves using water with detergents or enzymatic cleaner and removing foreign material from objects and surfaces, including organic material such as body fluids or inorganic material like soil. Cleaning is performed before high-level disinfection and sterilization because foreign materials on the cover of the devices interfere with process...
Chemical Agents for Microbial Control
Methods of Sterilization I: Physical Methods
Steam sterilization uses non-toxic, low-cost moist heat in the form of saturated steam under pressure, which is fast, microbicidal, and sporicidal, and quickly warms and penetrates fabrics. Autoclaves, or steam sterilizers, expose each item to direct steam contact for a predetermined time at the necessary...
Methods of Sterilization II: Chemical Methods
Using chemical sterilization rather than heat to clean out equipment is recommended. It eradicates and removes all bacteria,...
Hand hygiene
Hand washing...
Physical Methods for Controlling Microbial Growth: Radiation and Filtration

