Stratospheric aerosol parameters for the Fuego volcanic incursion

In atomic emission spectroscopy (AES), high-temperature atomizers excite a broad range of elements and molecules that generate complex emissions from sources such as oxides, hydroxides, and flame combustion products in the flame or plasma. Several strategies can be employed to minimize spectral interferences caused by overlapping emission lines or bands. These include increasing instrument resolution, choosing alternative emission lines, optimally placing the detector in low-background regions,...

Sulfur, an important element in the chemical makeup of proteins, is recycled through the atmosphere and aquatic and terrestrial environments. Found in the atmosphere as sulfur dioxide (SO2), sulfur is released by decaying organisms, weathered rocks, geothermal vents, volcanos, and burning fossil fuels. It is deposited into the ecosystem, cycled through the biotic community, and either released back into the atmosphere as gas or deposited in marine sediment for long-term storage and eventual...

Volatilization gravimetry is an analytical technique that measures the mass lost due to the volatilization of the substance. This technique is used to estimate the amount of volatile material in a sample. To perform this method, heat a known amount of the sample to a high temperature in a crucible or other suitable vessel. The volatile substance in the sample evaporates, and the vapor is completely expelled from the crucible either by heating the sample or bubbling a stream of inert gas through...

Atomic Absorption Spectroscopy (AAS) atomizes samples through flame atomization or electrothermal atomization. Flame atomization typically involves a nebulizer and spray chamber assembly to combine the sample with a fuel–oxidant mixture, creating a fine aerosol mist that enters a burner. Typically, the fuel and oxidant are combined in an approximately stoichiometric ratio. However, for atoms that are easily oxidized, a fuel-rich mixture may be more advantageous. Only about 5% of the aerosol...

Sulfur is an essential element in biological systems, contributing to synthesizing key biomolecules, including amino acids such as cysteine and methionine, and cofactors such as coenzyme A and biotin. Microorganisms primarily assimilate sulfur as sulfate (SO₄²⁻) from the environment, which must undergo a series of biochemical transformations before it can be incorporated into cellular components. As sulfate is highly oxidized, it must undergo assimilatory sulfate reduction to become...

The experimental conditions in a gravimetric analysis should be optimized to maximize the particle size and purity of the obtained precipitate. Ideally, the concentration of the precipitating reagent should be low with effective stirring to maintain low relative supersaturation for the growth of large crystals. In homogeneous precipitation, the precipitant is slowly generated by a chemical reaction in the solution to avoid local reagent excesses. For example, urea decomposes gradually to...