Related Experiment Video
Updated: Jun 16, 2026
Multimodal Approach to Assess Bone Regeneration and Scaffold Performance
Published on: February 13, 2026
Bone response to free-form fabricated hydroxyapatite and zirconia scaffolds: a transmission electron microscopy study
Kathryn Grandfield1, Anders Palmquist, Fredric Ericson
1Department of Engineering Sciences, The Ångström Laboratory, Uppsala University, Uppsala, Sweden. kathryn.grandfield@angstrom.uu.se
Background:
Understanding the interfacial reactions to synthetic bone regenerative scaffolds in vivo is fundamental for improving osseointegration and osteogenesis. Using transmission electron microscopy, it is possible to study the biological response of hydroxyapatite (HA) and zirconia (ZrO(2) ) scaffolds at the nanometer scale.
Purpose:
In this study, the bone-bonding abilities of HA and ZrO(2) scaffolds produced by free-form fabrication were evaluated in the human maxilla at 3 months and 7 months.
Materials And Methods:
HA and ZrO(2) scaffolds (ø: 3 mm) were implanted in the human maxilla, removed with surrounding bone, embedded in resin, and sectioned. A novel focused ion beam (FIB) sample preparation technique enabled the production of thin lamellae for study by scanning transmission electron microscopy.
Results:
Interface regions were investigated using high-angle annular dark-field imaging and energy-dispersive X-ray spectroscopy analysis. Interfacial apatite layers of 80 nm and 50 nm thickness were noted in the 3- and 7-month HA samples, respectively, and bone growth was discovered in micropores up to 10 µm into the samples.
Conclusions:
The absence of an interfacial layer in the ZrO(2) samples suggest the formation of a direct contact with bone, while HA, which bonds through an apatite layer, shows indications of resorption with increasing implantation time. This study demonstrates the potential of HA and ZrO(2) scaffolds for use as bone regenerative materials.
