Related Experiment Video
Updated: Jun 15, 2026

Development of Sulfidogenic Sludge from Marine Sediments and Trichloroethylene Reduction in an Upflow Anaerobic Sludge Blanket Reactor
Published on: October 15, 2015
A novel process to treat spent petroleum catalyst using sulfur-oxidizing lithotrophs
Dong J Kim1, Debaraj Mishra, Jong G Ahn
1Minerals and Material Processing Division, Korea Institute of Geoscience and Mineral Resources, Daejeon, South Korea.
Abstract:
A novel process was developed using sulfur-oxidizing bacteria to extract metal values like Ni, V and Mo from spent petroleum catalyst. Bacteria were grown in elemental sulfur media for five day and after filtering, the filtrate was used for leaching purpose. Effect of different parameters such as contact time, particle size, pulp density and lixiviant composition were studied to find out the extent of metal leaching during the leaching process. XRD analysis proved the existence of V in oxide form, Ni in sulfide form, Mo both in oxide as well as sulfide forms, and sulfur in elemental state only. In all the cases studied Ni and V showed higher leaching efficiency compared to Mo. The low Mo leaching rate may be either due to formation of impervious sulfur layer or refractoriness of sulfides or both. Leaching kinetics followed dual rate, initial faster followed by slower. Dissolution mechanism was explained on the basis of both surface and pore diffusion rate. The leaching kinetics followed 1st order reaction rate. Finally, multiple linear regression analysis was carried out to compare the observed and calculated leaching percentage values for three metals.
More Related Videos
Related Concept Videos
Bioremediation
Microbial Bioremediation of Hydrocarbons
Microbial Wastewater Treatment
Microbial Leaching
Anoxygenic Photosynthesis
Microbes and the Sulfur Cycle

