Permanent magnet desktop magnetic resonance imaging system with microfabricated multiturn gradient coils for...

A prototype for a desktop high-resolution magnetic resonance imaging (MRI) velocimetry instrument to characterize flow fields in a capillary tube is demonstrated. This inexpensive compact system is achieved with a 0.6 T permanent magnetic configuration (Larmor frequency of 25 MHz) and temperature compensation using off-the-shelf NdFeB permanent magnets. A triaxial gradient module with microfabricated copper coils using a lithographic fabrication process has been developed. This gradient module is capable of generating fast-switching gradients (<100 micros) with amplitudes up to 1.7 T/m using custom made current amplifiers, and was optimized for microflow imaging. The radio frequency probe is integrated with the gradient module and is driven by custom electronics. A two-dimensional (2D) cross-sectional static image of the inside of a capillary tube with an inner diameter of 1.67 mm is acquired at an in-plane spatial resolution of better than 40 microm. Time-of-flight flow measurements were also obtained using this MRI system to measure the velocity profile of water flowing at average velocities of above 50 mm/s. The flow profile for slower flow velocities was obtained using phase-encoded techniques, which provides quantitative velocity information in 2D.