Related Experiment Video
Updated: Jun 14, 2026

Assessment of Boron Doped Diamond Electrode Quality and Application to In Situ Modification of Local pH by Water Electrolysis
Published on: January 6, 2016
Determination of boron contents in water samples collected from the Neelum valley, Azad Kashmir, Pakistan
Muhammad Akram1, Matiullah, Arshid Iqbal
1Physics Division, PINSTECH, Islamabad, Pakistan. akram@pinstech.org.pk
Abstract:
Intake of boron from food and drinking water may pose a risk to the public health above a certain concentration level. Therefore, knowledge of boron concentration in drinking water and food items is essential. In this context, samples of drinking water were collected from natural springs of the Neelum valley, Azad Kashmir, hit by devastating earthquake in 2005. In these samples, boron concentration was determined using neutron-induced radiography technique. To do so, unknown water samples, along with standard of known boron dried on CR-39 detectors, were irradiated with thermal neutrons. After exposure, CR-39 detectors were etched in 6 M NaOH at 70°C. The tracks produced due to the alpha particles and (7)Li ions as a result of (10)B(n,α)(7)Li reaction were counted under an optical microscope. The tracks produced in theses samples were then related to the boron contents. The measured boron concentration in water samples was found to vary from 0.105 ± 0.005 to 0.247 ± 0.013 mg/l with an average value of 0.17 ± 0.04 mg/l, which are within the acceptable limits.
More Related Videos
Related Concept Videos
Testing Water Quality
Quality of Water
Determining the pH of Salt Solutions
Atomic Mass

