Related Experiment Video
Updated: Jun 14, 2026

Use of Two Intracorporeal Ventricular Assist Devices As a Total Artificial Heart
Published on: May 11, 2018
Serial use of an interventional lung assist device and a ventricular assist device
Daniele Camboni1, Alois Philipp, Assad Haneya
1Department of Cardiothoracic Surgery, University Medical Center Regensburg, Regensburg, Germany. dcamboni@arcor.de
Abstract:
A low-resistance membrane oxygenator [interventional lung assist (iLA), Novalung, Hirrlingen, Germany] has been placed in series with a pulsatile extracorporeal left ventricular assist device (LVAD, Berlin Heart EXCOR, Berlin, Germany) in 1 circuit in a patient with postcardiotomy cardiopulmonary failure subsequent to 5 days of extracorporeal life support (ECLS or ECMO). This concept offers an intermediate step between ECLS and mechanical ventilation in this particular patient population. Pulmonary function stabilized under the combined lung and ventricular support. As a result, mechanical ventilation became sufficient after 48 hours, and the iLA was then removed easily out of the circuit. In conclusion, this case demonstrates the feasibility of integrating a low-resistance membrane oxygenator for additional lung support in extracorporeal LVAD patients.
Related Concept Videos
Mechanical Ventilation II: Invasive Ventilation
Negative-Pressure Ventilators
Negative-pressure ventilators create a vacuum around the chest or body to draw air into the lungs, simulating breathing. This method does not require an...
Ventilatory Modes
There are three ventilatory modes: full support, partial support, and spontaneous. These are described below.
Full Support Modes
Full support modes include controlled mechanical ventilation, continuous mandatory...
Mechanical Ventilation III: Noninvasive Ventilation
Noninvasive Positive-Pressure Ventilation (NIPPV)
Mechanical Ventilation I: Indication and Settings
Cardiomyopathy V: Interprofessional Care
Oxygen Delivering System II: Venturi Mask and Transtracheal Oxygen
Venturi Mask
The Venturi mask, named after the Venturi effect, is designed to deliver precise oxygen concentrations. It consists of a large tube with an oxygen inlet that narrows down, causing a pressure drop that pulls air in through adjustable side ports. The mask is a lightweight,...
