Fabrication of one dimensional polyaniline nanofibers by UV-assisted polymerization in the aqueous phase

At the room temperature, a novel and environmental friendly approach for synthesizing polyaniline (PANI) nanofibers on a large scale is presented firstly in the aqueous phase by ultraviolet (UV)-assisted polymerization using cetyltrimethylammonium bromide (CTAB) as the "soft-template." It is obvious that the polymerization process can be accelerated under the illumination of UV light and the preliminary mechanism has been pointed out. Furthermore, it also can be noted that the lower concentrations of CTAB and HCl are helpful for the fabrication of smooth and uniform PANI nanofibers. As observed with FE-SEM and TEM, the as-synthesized PANI nanostructures under the appropriate conditions are composed of uniform nanofibers with the average diameter of about 100 nm and the length of several micrometers. Subsequently, the synthesized PANI nanostructures are characterized with UV-vis, FT-IR, XRD spectra, and the typical physical and chemical properties of PANI are displayed. In addition, the conductivity of the synthesized PANI nanofibers was also measured with the four probe method and the excellent conductivity was presented. In summary, the procedure presented here only involving exposure of an acidic aqueous solution of aniline to UV light illumination is so simple and the needed equipment is so low cost, from the viewpoint of technological applications, that the large-scale UV-assisted polymerization of PANI nanofibers from the monomer solution is feasible and promising.