Nanoscale coatings on wood: polyelectrolyte adsorption and layer-by-layer assembled film formation

Surface chemistry of wood is based on the exposed surface that is the combination of the intact and cut cellular wall material. It is inherently complex and changes with processing history. Modification of wood surfaces through noncovalent attachment of amine containing water soluble polyelectrolytes provides a path to create functional surfaces in a controlled manner. Adsorption of polyethylenimine (PEI) and polydiallydimethylammonium chloride (PDDA) to wood was quantified as a function of solution conditions (pH and ionic strength). Polycation adsorption was maximized under basic pH without the addition of electrolyte. Added salt either had marginal influence or decreased adsorption of polycation, indicating interactions are strongly influenced by Coulombic forces. PEI adsorption could be modeled by both a Langmuir and Freundlich equations, although the wood surface is known to be heterogeneous. After adsorption of polycations, layer-by-layer assembled films were created on the wood surface. Layered films masked ultrastructural features of the cell wall, while leaving the microscale features of wood (cut lumen walls and openings) evident. These findings revealed for the first time that nanoscale films on wood can be deposited without changing the microscopic and macroscopic texture. Functionalized wood surfaces created by nanoscale films may have a future role in adhesives systems for wood composites, wood protection, and creating new functional features on wood.