Related Experiment Video
Updated: Jun 13, 2026
Fabrication of Superhydrophobic Metal Surfaces for Anti-Icing Applications
Published on: August 15, 2018
Systematic control of hydrophobic and superhydrophobic properties using double-rough structures based on mixtures of
Benjamin Hipp1, Ilka Kunert, Michael Dürr
1Department of Natural Sciences-Chemical Engineering, University of Applied Sciences, Esslingen, D-73728 Esslingen, Germany.
Abstract:
Double-rough surfaces were prepared by using mixtures of metal oxide nanoparticles with diameters on two different length scales. The degree of double-roughness of these surfaces was controlled using defined ratios of larger (approximately 300 nm) and smaller (approximately 30 nm) particles. If the preparation method was chosen such that the smaller particles decorate the larger ones, a roughness on two length scales was induced and an increase of contact angles from 130 degrees to 160 degrees with increasing double-roughness was observed. At highest double-roughness, a transition from the Wenzel to Cassie regime occurred. The results were quantitatively modeled on the basis of a modified Wenzel equation taking into account the two hierarchies of roughness.
