Related Experiment Video
Updated: Jun 13, 2026

Fabrication of Carbon Nanotube High-Frequency Nanoelectronic Biosensor for Sensing in High Ionic Strength Solutions
Published on: July 22, 2013
Pulsed gate sweep strategies for hysteresis reduction in carbon nanotube transistors for low concentration NO(2) gas
M Mattmann1, C Roman, T Helbling
1Micro and Nanosystems, Department of Mechanical and Process Engineering, ETH Zurich, CH-8092 Zurich, Switzerland. moritz.mattmann@micro.mavt.ethz.ch
Abstract:
Carbon-nanotube-based field effect transistors (CNFETs) have been employed as highly sensitive chemical sensors. Often used as the sensor output signal, the gate threshold voltage (V(th)) is subject to concentration-dependent shifts upon exposure to target analytes. However, an unambiguous determination of the intrinsic V(th) is usually hampered by substantial hysteresis in CNFET gate characteristics. In this study we show that short gate voltage (V(gd)) pulses can be used for hysteresis reduction in CNFETs as chemical sensors, in particular for NO(2) detection. In the pulsed operation regime, even small shifts of V(th) upon sub-ppm NO(2) exposure remain resolvable. Furthermore, the hysteretic behaviour is systematically investigated by varying the pulse waveforms and timing parameters. Finally, we use an adapted hysteresis model for pulsed V(gd) and employ it to discuss the measurement data.
Related Concept Videos
Characteristics of MOSFET
Various vital parameters influence their functionality, which is crucial for theory and electronics applications. First, channel dimensions, precisely length, and width, are pivotal. The size of these channels affects the transistor's ability to carry current and switching speeds; shorter channels typically enable quicker...
MOSFET: Depletion Mode
The primary characteristic of depletion-mode MOSFETs is their ability to conduct current between the drain and source terminals without gate bias. This inherent conductivity arises...
Biasing of FET
In an N-channel JFET, the structure consists of N-type material forming the channel on a P-type substrate, with the gate...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no current...
