Related Experiment Video
Updated: Jun 13, 2026
10:17
20 mJ, 1 ps Yb:YAG Thin-disk Regenerative Amplifier
Published on: July 12, 2017
Repetitively pulsed mode-locked Nd:phosphate glass laser oscillator-amplifier system
Applied Optics
|April 15, 2010
Abstract:
Performance of a repetitively pulsed mode-locked Nd:glass laser system employing athermal phosphate glass in the oscillator and amplifier stages is described. Improved passive mode-locking characteristics of the oscillator are achieved through use of a l00-microm thick intracavity etalon, enabling reliable generation of transform-limited pulses typically of 5-psec duration. The system produces 1054-nm pulses of high beam quality and ~25-mJ energy at a pulse repetition rate of ~0.2 Hz. Subsequent frequency-doubling steps give conversion efficiencies of ~50% and 25%, respectively.
More Related Videos
Related Concept Videos
01:30Oscillations In An LC Circuit
An idealized LC circuit of zero resistance can oscillate without any source of emf by shifting the energy stored in the circuit between the electric and magnetic fields. In such an LC circuit, if the capacitor contains a charge q before the switch is closed, then all the energy of the circuit is initially stored in the electric field of the capacitor. This energy is given by
01:17MOSFET Amplifiers
The MOSFET, when operating in its active region, functions as a voltage-controlled current source. In this region, the gate-to-source voltage controls the drain current. This principle underlies the operation of the transconductance MOSFET amplifier. The output current is directed through a load resistor to convert this amplifier into a voltage amplifier. The output voltage is then obtained by subtracting the voltage drop across the load resistance from the supply voltage. This process results...