Related Experiment Video
Updated: Jun 13, 2026

Generation and Control of Electrohydrodynamic Flows in Aqueous Electrolyte Solutions
Published on: September 7, 2018
Dynamic reversibility of hydrodynamic focusing for recycling sheath fluid
Nastaran Hashemi1, Peter B Howell, Jeffrey S Erickson
1Center for Bio/Molecular Science and Engineering, Naval Research Laboratory, Washington, DC, USA.
Abstract:
The phenomenon of "unmixing" has been demonstrated in microfluidic mixers, but here we manipulate laminar flow streams back to their original positions in order to extend the operational utility of an analytical device where no mixing is desired. Using grooves in the channel wall, we passively focus a sample stream with two sheath streams to center it in a microchannel for optical analysis. Even though the sample stream is completely surrounded by sheath fluid, reversing the orientation of the grooves in the channel walls returns the sample stream to its original position with respect to the sheath streams. We demonstrate the separation of the sample stream from the contiguous sheath streams and the recycling of the sheath fluid using the reversibility of laminar flow. Polystyrene microspheres and fluorescent dye were used to quantify the performance of the unsheathing process. We found that the maximum numbers of microspheres and all of the fluorescent dye were recaptured at sheath recycling levels <92%. The use of this sheathing technique has previously been demonstrated in a sensitive microflow cytometer; the unsheathing capability now provides the opportunity to recover particles from the sensor with minimal dilution or to recycle the sheath fluid for long-term unattended operation.
More Related Videos
10:14Fabrication and Operation of Acoustofluidic Devices Supporting Bulk Acoustic Standing Waves for Sheathless Focusing of Particles
Published on: March 6, 2016
11:08Generation of Size-controlled Poly (ethylene Glycol) Diacrylate Droplets via Semi-3-Dimensional Flow Focusing Microfluidic Devices
Published on: July 3, 2018
Related Concept Videos
Design Example: Creating a Hydraulic Model of a Dam Spillway
Steady, Laminar Flow Between Parallel Plates
Typical Model Studies
Hydraulic Jump
Laminar Flow
Rapidly Varying Flow