Related Concept Videos
02:39Emission Spectra
When solids, liquids, or condensed gases are heated sufficiently, they radiate some of the excess energy as light. Photons produced in this manner have a range of energies, and thereby produce a continuous spectrum in which an unbroken series of wavelengths is present.
01:26Inductively Coupled Plasma Atomic Emission Spectroscopy: Instrumentation
Inductively coupled plasma (ICP) is the common plasma source used in atomic emission spectroscopy (AES), a technique that detects and analyzes various elements in a sample. This method is often called inductively coupled plasma atomic emission spectroscopy (ICP-AES).
There are three main types of inductively coupled plasma atomic emission spectroscopy (ICP-AES) instruments: sequential, simultaneous multichannel, and Fourier transform instruments, with the latter being less commonly used.
There are three main types of inductively coupled plasma atomic emission spectroscopy (ICP-AES) instruments: sequential, simultaneous multichannel, and Fourier transform instruments, with the latter being less commonly used.
01:15NMR Spectroscopy: Chemical Shift Overview
The position of the absorption signal of a sample is reported relative to the position of the signal of tetramethylsilane (TMS), which is added as an internal reference while recording spectra. The difference between the absorption frequencies of the sample and TMS (in Hz) is divided by the spectrometer operating frequency (in MHz) to obtain a dimensionless quantity called the chemical shift. It is reported on the δ (delta) scale and expressed in parts per million.
For instance, the proton...
For instance, the proton...
01:08IR Spectrum Peak Splitting: Symmetric vs Asymmetric Vibrations
Identical bonds within a polyatomic group can stretch symmetrically (in-phase) or asymmetrically (out-of-phase). Similar to hydrogen bonding, these vibrations also influence the shape of the IR peak. Generally, asymmetric stretching frequencies are higher than symmetric stretching frequencies. For example, primary amines exhibit two distinct IR peaks between 3300–3500 cm−1 corresponding to the symmetric and asymmetric N-H stretching, while secondary amines exhibit a single stretching vibration...
01:22Atomic Emission Spectroscopy: Instrumentation
The instrumentation of atomic emission spectrometry (AES) involves various components, including atomization devices that convert samples into gas-phase atoms and ions. There are two main types of atomization devices: continuous and discrete atomizers. Continuous atomizers, like plasmas and flames, introduce samples in a constant stream, while discrete atomizers inject individual samples using syringes or autosamplers. The most common discrete atomizer is the electrothermal atomizer.
01:30Atomic Emission Spectroscopy: Interference
In atomic emission spectroscopy (AES), high-temperature atomizers excite a broad range of elements and molecules that generate complex emissions from sources such as oxides, hydroxides, and flame combustion products in the flame or plasma. Several strategies can be employed to minimize spectral interferences caused by overlapping emission lines or bands. These include increasing instrument resolution, choosing alternative emission lines, optimally placing the detector in low-background regions,...
You might also read
Related Articles
Articles linked to this work by shared authors, journal, and citation graph.
Sort by
Same author
Graphical user interface for a robotic workstation in a surgical environment.
Annual International Conference of the IEEE Engineering in Medicine and Biology Society. IEEE Engineering in Medicine and Biology Society. Annual International Conference·2017
Same author
Method of accurately measuring the spectral line tilt in the Ebert spectrograph.
Applied optics·2010
Same author
Response of scanning Fabry-Perot interferometers to asymmetric spectral line profiles.
Applied optics·2010
Related Experiment Video
Updated: Jun 12, 2026
08:53
Angle-resolved Photoemission Spectroscopy At Ultra-low Temperatures
Published on: October 9, 2012
Spectral line tilt effect in the Ebert spectrograph.
Applied Optics
|May 22, 2010
Summary
Spectral lines tilt away from the normal on photographic plates in Ebert spectrographs when the grating rotates. This study calculates this spectral line tilt effect and compares it with experimental data.
Area of Science:
- Spectroscopy
- Optical Physics
- Astronomy Instrumentation
Background:
- Ebert spectrographs are used for high-resolution spectral analysis.
- Understanding spectral line behavior is crucial for accurate measurements.
- Grating rotation can introduce optical aberrations.
Purpose of the Study:
- To calculate the spectral line tilt effect in Ebert spectrographs.
- To compare theoretical calculations with experimental observations.
- To validate the understanding of optical physics in spectrographic instrumentation.
Main Methods:
- Theoretical calculation of spectral line tilt based on Ebert spectrograph geometry.
- Experimental setup to measure spectral line positions on photographic plates.
Main Results:
- The study successfully calculated the spectral line tilt effect.
- Calculated values showed good agreement with experimental data.
- The observed tilt is a direct consequence of grating rotation.
Conclusions:
- The theoretical model accurately predicts the spectral line tilt in Ebert spectrographs.
- Experimental validation confirms the calculated effect.
- This work enhances the understanding of spectrograph performance and calibration.