Wood's structural properties derive from fibers aligned along the tree's length, contributing significantly to its mechanical strength. Wood exhibits up to twenty times greater tensile strength along these fibers compared to across them, and generally shows better performance under compression than tension. The length of fibers varies, with hardwoods having fibers around one twenty-fifth inch long and softwoods ranging from one-eighth to one-third inch.
The strength characteristics of wood are...

Wood products encompass a broad range of materials crafted from wood strands, veneers, lumber, and even waste wood-like shreds, designed for both structural and nonstructural purposes. Various specialized wood products have been developed to enhance strength, durability, and versatility in building applications.
Glue-laminated wood, often referred to as glulam, combines multiple smaller pieces of dimensional lumber using adhesives to form a single, larger piece. Cross-laminated timber consists...

Lumber is derived from logs which are harvested, debarked, and processed into long pieces with a rectangular cross-section. The transformation of logs into lumber involves multiple steps, beginning with an automated saw that slices the log into slabs. These slabs are then transported via a conveyor belt to smaller saws, where they are cut into square-edged pieces of specific widths.
Initially, the surfaces of these lumber pieces are rough, and their dimensions may vary slightly from one end to...

Wilhelm Rudolph Fittig discovered the pinacol coupling reaction in 1859. It is a radical dimerization reaction and involves the reductive coupling of aldehydes or ketones in the presence of hydrocarbon solvent to yield vicinal diols.

Laminins are heterotrimeric proteins with high molecular mass found in the extracellular matrix. Each laminin molecule is composed of three chains, viz. alpha, beta, and gamma, coded by five, four, and three paralogous genes, respectively. Laminins are categories based on the compositions of the three chains.
In humans, the five forms of alpha chains are LAMA 1, LAMA 2, LAMA 3, LAMA 4, and LAMA 5. The four forms of beta chains are LAMB 1, LAMB 2, LAMB 3, and LAMB 4. The three forms of gamma...

Lumber defects, which can affect both the appearance and structural integrity of wood, include a variety of growth and manufacturing flaws. Growth defects such as knots and knotholes occur where branches were once attached to the tree trunk, with knotholes forming when these knots fall out. Other natural defects include decay and insect damage, which compromise the wood's strength and durability.
Shakes are minor fractures that run along or across the wood's annual rings, while wane is...