Related Experiment Video

Updated: Jun 12, 2026

Evaluation of Integrated Anaerobic Digestion and Hydrothermal Carbonization for Bioenergy Production
07:34

Evaluation of Integrated Anaerobic Digestion and Hydrothermal Carbonization for Bioenergy Production

Published on: June 15, 2014

Anaerobic digestion as final step of a cellulosic ethanol biorefinery: Biogas production from fermentation effluent

H Uellendahl1, B K Ahring

  • 1Copenhagen Institute of Technology/Aalborg University, Ballerup, Denmark. hu@bio.aau.dk

Biotechnology and Bioengineering
|May 28, 2010
PubMed

More Related Videos

Continuously-stirred Anaerobic Digester to Convert Organic Wastes into Biogas: System Setup and Basic Operation11:31

Continuously-stirred Anaerobic Digester to Convert Organic Wastes into Biogas: System Setup and Basic Operation

Published on: July 13, 2012

Biogas Purification through the use of a Microalgae-Bacterial System in Semi-Industrial High Rate Algal Ponds07:34

Biogas Purification through the use of a Microalgae-Bacterial System in Semi-Industrial High Rate Algal Ponds

Published on: March 22, 2024

Related Concept Videos

Production of Alcohol01:27

Production of Alcohol

Continuous fermentation is a key strategy in industrial ethanol production, particularly when efficiency, scalability, and high yields are essential. This approach allows for uninterrupted operation and optimized resource utilization. The primary feedstock, corn starch, undergoes enzymatic hydrolysis facilitated by α-amylase and glucoamylase. These enzymes break down the starch into fermentable sugars such as glucose, which are readily assimilated by fermentative microorganisms.Fermentation...
Biofuels01:25

Biofuels

The microbial conversion of organic matter into biofuels holds potential as a renewable energy source. Among biofuel sources, microalgae are recognized as a highly efficient and adaptable feedstock for biodiesel production, owing to their rapid biomass accumulation, elevated lipid productivity, and capacity to proliferate in diverse aquatic systems, including freshwater, marine, and wastewater habitats. Unlike terrestrial crops, microalgae do not compete for land and can achieve significantly...
Microbial Fuel Cells01:23

Microbial Fuel Cells

Microbial fuel cells (MFCs) are bioelectrochemical devices that generate electricity by exploiting the metabolic processes of electrogenic bacteria. These systems provide a renewable energy source and serve as an innovative method for treating organic waste, such as wastewater.A typical MFC consists of two chambers: an anoxic (oxygen-free) compartment that houses the bacteria and an oxic (oxygen-rich) compartment that contains oxygen as the terminal electron acceptor. Many MFCs use proton...
Microbial Wastewater Treatment01:30

Microbial Wastewater Treatment

Microbial communities in aquatic ecosystems play a key role in the natural breakdown of contaminants introduced through domestic and industrial effluents. Acting as biological catalysts, these microbes change and mineralize a wide range of organic and inorganic pollutants under different redox conditions.In oxygen-rich surface waters, aerobic heterotrophs lead organic matter breakdown, using oxygen as the terminal electron acceptor to efficiently oxidize substrates to carbon dioxide and water.
Bioreactor Controls-II01:18

Bioreactor Controls-II

In aerobic fermentations, oxygen is vital for microbial growth and metabolite production. Since air comprises only about 20% oxygen and the gas is poorly soluble in water—just 9 ppm at 20°C—supplying sufficient oxygen becomes a critical challenge, especially in high-demand processes like yeast growth or citric acid production. Even a fully saturated broth may offer only a few seconds of oxygen availability.To address this, sterile or scrubbed air is introduced into the fermentor via a sparger...
Scale-Up Processes01:14

Scale-Up Processes

The scale-up of microbial fermentation processes is essential in industrial biotechnology, allowing the transition from laboratory-scale experiments to commercial-scale production while aiming to maintain product yield and quality. This process requires meticulous adjustment of equipment design, process parameters, and contamination control strategies to accommodate increasing culture volumes.At the laboratory scale, cultures are typically maintained in 1 to 10-liter glass or autoclavable...