Related Experiment Video
Updated: Jun 12, 2026

A Multimodal Imaging Framework to Advance Phenotyping of Living Label-free Breast Cancer Cells
Published on: August 22, 2025
Monte Carlo model of spatially offset Raman spectroscopy for breast tumor margin analysis
Matthew D Keller1, Robert H Wilson, Mary-Ann Mycek
1Department of Biomedical Engineering, Vanderbilt University, Nashville, Tennessee 37235, USA.
Abstract:
We have previously demonstrated the discrimination of two layers of soft tissue, specifically normal breast tissue overlying breast tumor, using spatially offset Raman spectroscopy (SORS). In this report, a Monte Carlo code for evaluating SORS in soft tissues has been developed and compared to experimental results. The model was employed to investigate the effects of tissue and probe geometry on SORS measurements and therefore to develop the design strategies of applying SORS for breast tumor surgical margin evaluation. The model was used to predict SORS signals for different tissue geometries difficult to precisely control experimentally, such as varying normal and tumor layer sizes and the addition of a third layer. The results from the model suggest that, using source-detector separations of up to 3.75 mm, SORS can detect sub-millimeter-thick tumors under a 1 mm normal layer, and tumors at least 1 mm thick can be detected under a 2 mm normal layer.
Related Concept Videos
Raman Spectroscopy: Overview
However, a small fraction of the scattered light exhibits a frequency shift due to the exchange of energy between the incident photons and the...
Raman Spectroscopy Instrumentation: Overview
The monochromatic laser source, typically using visible or near-infrared radiation, generates a highly focused beam of light. This light interacts with the molecules of the sample, scattering some of the light. Liquid and gaseous samples are usually tested in ordinary glass capillaries, while solids can be analyzed as powders packed in capillaries or as potassium...
