Removal of As(V) using iron oxide impregnated carbon prepared from Tamarind hull

Iron oxide impregnated tamarind hull carbon (IOITHC) was developed for use as an adsorbent for the removal of As(V) from water. Tamarind hull was used as the source of carbonaceous material, which was first treated with ferric chloride and ammonium hydroxide solutions with successive calcination at 873-974 K in a muffle furnace for 1 h to prepare an arsenic adsorbent. The B.E.T surface area of IOITHC was found to be 304.6 m(2) g(-1) and the average iron content in the adsorbent was found to be 7 wt%. The point of zero charge (pH(zpc)) of IOITHC was found to be 6.9. As(V) and arsenic (as total) adsorption on IOITHC were investigated in batch mode using As(V) spiked distilled water and real contaminated groundwater (CGW). The effects of speed of agitation, adsorbent particle size, temperature, pH of the solution, and concentration of the adsorbate on the adsorption process were investigated. The maximum adsorption capacity of about 1.2 mg g(-1) As(V) was achieved. The removal of As(V) on IOITHC was compared with the untreated tamarind hull carbon as well as with the activated commercial carbon and IOITHC was found to be better adsorbent. Arsenic adsorption from arsenic contaminated groundwater (CGW) on IOITHC in batch mode indicates that 98% removal was achieved for adsorbent loading of 3.0 g L(-1) with initial arsenic concentration of 264 microg L(-1). Desorption study of arsenic from As(V)-loaded IOITHC was performed using aqueous solution in the pH range of 3 to 12.