Related Experiment Video
Updated: Jun 12, 2026

The Portable Chemical Sterilizer (PCS), D-FENS, and D-FEND ALL: Novel Chlorine Dioxide Decontamination Technologies for the Military
Published on: June 29, 2014
Inactivation of methicillin-resistant Staphylococcus aureus (MRSA) and vancomycin-resistant Enterococcus faecium
K L Callahan1, N K Beck, E A Duffield
1Department of Environmental and Occupational Health Sciences, University of Washington, Seattle, Washington, USA.
Abstract:
Contaminated environmental surfaces are important reservoirs in the transmission of many human pathogens. Although several options exist for disinfecting contaminated environmental surfaces, few are compatible with use on both hard smooth non-porous (hard) and soft porous surfaces (soft) while still offering significant disinfection of the contaminating organisms. This study evaluated the efficacy of mist application of a stabilized chlorine dioxide and quaternary ammonium compound-based disinfectant (Cryocide20) for inactivation of methicillin-resistant Staphylococcus aureus (MRSA) and vancomycin-resistant Enterococcus faecium (VRE) on various environmental surfaces. MRSA and VRE were applied to hard and soft surfaces (glass, steel, tile, carpet, and cotton fabric), allowed to dry, and exposed to a uniform mist application of the disinfectant solution. After 1 hr of contact time, the residual disinfectant was neutralized, and the bacteria were recovered and enumerated on brain heart infusion (BHI) agar. Reduction of both test bacteria was observed on most of the hard and soft surfaces tested. Log(10) reduction of the organisms tended to be higher on steel, tile, and carpet than glass or cotton. Overall, these results suggest that mist application of Cryocide20 disinfectant may be an effective option for reduction of low levels of infectious bacterial pathogens from contaminated environmental surfaces.
Related Concept Videos
Chemical Agents for Microbial Control
Clinical Significance of Antibiotic Resistance
Cleaning, Sterilization, and Disinfection
Cleaning
The cleaning process usually involves using water with detergents or enzymatic cleaner and removing foreign material from objects and surfaces, including organic material such as body fluids or inorganic material like soil. Cleaning is performed before high-level disinfection and sterilization because foreign materials on the cover of the devices interfere with process...
Physical Methods for Controlling Microbial Growth: Radiation and Filtration
Methods of Sterilization II: Chemical Methods
Using chemical sterilization rather than heat to clean out equipment is recommended. It eradicates and removes all bacteria,...
Microbial Bioremediation of Pesticides
