Acoustic transmission of the respiratory system using speech stimulation

Two methods for the analysis of the acoustic transmission of the respiratory system are presented. Continuous speech utterance is used as acoustic stimulation. The transmitted acoustic signal is recorded from various sites over the chest wall. The AR method analyzes the power spectral density function of the transmitted sound, which heavily depends on the microphone assembly and the utterance. The method was applied to a screening problem and was tested on a small database that consisted of 19 normal and five abnormal patients. Using the first five AR coefficients and the prediction error of an AR(10) model, as discriminating features, the system screened all abnormals. An ARMA method is suggested, which eliminates the dependence on microphone and utterance. In this method, the generalized least squares identification algorithm is used to estimate the ARMA transfer function of the respiratory system. The normal transfer function demonstrates a peak at the range of 130-250 Hz and sharp decrease in gain for higher frequencies. A pulmonary fibrotic patient demonstrated a peak at the same frequency range, a much higher gain in the high frequency range with an additional peak at about 700 Hz.