Fabrication, mechanical properties, and biocompatibility of graphene-reinforced chitosan composites

Few-layered graphene sheets, synthesized by direct current arc-discharge method using NH(3) as one of the buffer gases, were dispersed in chitosan/acetic acid solutions. FTIR and X-ray photoelectron spectroscopy showed the presence of oxygen-containing functional groups on the surface of graphene sheets that may assist the good dispersion of graphene in chitosan solution. Graphene/chitosan films were produced by solution casting method. The mechanical properties of composite films were tested by nanoindentation method. With the addition of a small amount of graphene in chitosan (0.1-0.3 wt %), the elastic modulus of chitosan increased over ∼ 200%. The biocompatibility of graphene/chitosan composite films was checked by tetrazolium-based colorimetric assays in vitro. The cell adhesion result showed that the L929 cell can adhere to and develop on the graphene/chitosan composite films as well as on pure chitosan film, indicating that graphene/chitosan composites have good biocompatibility. Because there is no metallic impurity in graphene raw materials, the time-consuming purification process for removing metal nanoparticles entrapped in carbon nanotubes is thus avoided when graphene is used to prepare biomedical materials. Graphene/chitosan composites are potential candidates as scaffold materials in tissue engineering.