Quantification in gas chromatography: prediction of flame ionization detector response factors from combustion
Jean-Yves de Saint Laumer1, Esmeralda Cicchetti, Philippe Merle
1Firmenich SA, Corporate R&D Division, PO Box 239, 1211 Geneva 8, Switzerland.
Abstract:
In a previous report, we validated the use of a database that compiled the relative response factors of flavor and fragrance compounds under standard GC conditions for a flame ionization detector. Here we investigate the prediction of unknown response factors from the molecular structure by using combustion enthalpies. In a first step, this enthalpy was well-predicted with either ab initio calculation or multiple linear regression based on the molecular formula. In a second step, good correlation was observed between these combustion enthalpies and experimental relative response factors, and so the response factors were predictable from only the molecular formula. With a database of 351 compounds, about 60% of them exhibited a difference of less than 5% between the predicted and experimental relative response factors and about 80% exhibited a difference of less than 10%.
More Related Videos
Related Concept Videos
Flame Photometry: Lab
Gas Chromatography: Types of Detectors-II
Flame Photometry: Overview
Gas Chromatography: Types of Detectors-I
TCD is the earliest and most widely used detector that operates by measuring the changes in the thermal conductivity of the carrier gas. When a sample compound enters the detector,...
Gas Chromatography: Overview of Detectors
A non-destructive detector allows a sample to be analyzed without altering or consuming it, meaning the sample can be collected after detection for further analysis. Examples include thermal conductivity detectors and...
Enthalpy and Heat of Reaction


