[Analysis of decayed wood by fungi with X-ray diffractometry and Fourier transform infrared spectroscopy]

In order to make clear the changes in the micro crystal structures of celluloses and the functional group of main components including cellulose, hemicelluloses and lignin in wood decayed by fungi, the crystallinity, layer spacing d in crystalline unit cell, width of crystallite and functional group of main components of Populus tomentosa Carr wood, which was decayed by Phanerochaete Chysosporium (white-rot) and Postia Placenta (brown-rot) with various durations, for two weeks, four weeks, six weeks, eight weeks and ten weeks, respectively, were investigated by means of X-ray diffraction and FTIR spectroscopy methods. It was concluded that the lattice structures of crystallite in wood cellulose were not destroyed by PC and PP, and the two theta angles and layer spacing d in crystallite were constant, although the decaying treatment times were different for each other when decayed by the same fungi. However, the crystallinity and width of crystallite decreased with the decaying treatment times increasing, and the decaying effects by PP were more significantly than those by PC, which showed that the damage extent of celluloses decayed by PP was greater than that by PC. It was estimated that the xylan in hemicelluloses had been degraded to various extents with the process of decaying in wood, resulting in the carbonyl content increasing, and the effects of degradation on hemicelluloses and celluloses by PC and PP were almost the same. Furthermore, benzene rings in lignin, which had no remarkable changes by PP, were oxidized into chain hydrocarbon after decaying by PC.