Related Experiment Video
Updated: Jun 10, 2026

High Speed Sub-GHz Spectrometer for Brillouin Scattering Analysis
Published on: December 22, 2015
[Comparison of correction methods for nonlinear optic path difference of reflecting rotating Fourier transform
Juan-Juan Jing1, Jin-Song Zhou, Bin Xiangli
1Key Laboratory of Spectral Imaging Technique, Xi' an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an 710119, China. jingjuanjuan@opt.ac.cn
Abstract:
The principle of reflecting rotating Fourier transform spectrometer was introduced in the present paper. The nonlinear problem of optical path difference (OPD) of rotating Fourier transform spectrometer universally exists, produced by the rotation of rotating mirror. The nonlinear OPD will lead to fictitious recovery spectrum, so it is necessary to compensate the nonlinear OPD. Three methods of correction for the nonlinear OPD were described and compared in this paper, namely NUFFT method, OPD replace method and interferograms fitting method. The result indicates that NUFFT was the best method for the compensation of nonlinear OPD, OPD replace method was better, its precision was almost the same as NUFFT method, and their relative error are superior to 0.13%, but the computation efficiency of OPD replace method is slower than NUFFT method, while the precision and computation efficiency of interferograms fitting method are not so satisfied, because the interferograms are rapid fluctuant especially around the zero optical path difference, so it is unsuitable for polynomial fitting, and because this method needs piecewise fitting, its computation efficiency is the slowest, thus the NUFFT method is the most suited method for the nonlinear OPD compensation of reflecting rotating Fourier transform spectrometer.
Related Concept Videos
IR Spectrometers
NMR Spectrometers: Resolution and Error Correction
Raman Spectroscopy Instrumentation: Overview
The monochromatic laser source, typically using visible or near-infrared radiation, generates a highly focused beam of light. This light interacts with the molecules of the sample, scattering some of the light. Liquid and gaseous samples are usually tested in ordinary glass capillaries, while solids can be analyzed as powders packed in capillaries or as potassium...

