Related Experiment Video
Updated: Jun 10, 2026

Using a Virtual Reality Walking Simulator to Investigate Pedestrian Behavior
Published on: June 9, 2020
Effect of bus size and operation to crash occurrences
Deo Chimba1, Thobias Sando, Valerian Kwigizile
1Department of Civil Engineering, Tennessee State University, 3500 John A Merritt Blvd, Torrence Building, Suite 108B, Nashville, TN 37209, United States. dchimba@tnstate.edu
Abstract:
This paper evaluates roadway and operational factors considered to influence crashes involving buses. Factors evaluated included those related to bus sizes and operation services. Negative binomial (NB) and multinomial logit (MNL) models were used in linearizing and quantifying these factors with respect to crash frequency and injury severities, respectively. The results showed that position of the bus travel lane, presence or absence of on-street shoulder parking, posted speed limit, lane width, median width, number of lanes per direction and number of vehicles per lane has a higher influence on bus crashes compared to other roadway and traffic factors. Wider lanes and medians were found to reduce probability of bus crashes while more lanes and higher volume per lane were found to increase the likelihood of occurrences of bus-related crashes. Roadways with higher posted speed limits excluding freeways were found to have high probability of crashes compared to low speed limit roadways. Buses traveling on the inner lanes and making left turns were found to have higher probability of crashes compared to those traveling on the right most lanes. The same factors were found to influence injury severity though with varying magnitudes compared to crash frequency.
Related Concept Videos
Multimachine Stability
In analyzing the system, the nodal equations represent the relationship between bus voltages, machine voltages, and machine currents. The nodal equation is given by:
Bus Impedance Matrix
In the first circuit, all machine voltage sources are short-circuited, leaving only the prefault voltage source at the fault location. The positive-sequence bus impedance matrix can be determined by solving the nodal equations,...
Friction: Problem Solving
Initially, a visual representation of the...
Design Consideration
The factor of safety is another key aspect...
Circuit Breaker and Fuse Selection
In high-voltage systems, circuit...
Controller Configurations
Control-system compensation involves various configurations, most commonly series or cascade compensation, in which the controller aligns...
