Related Experiment Video

Updated: Jun 9, 2026

Fabrication of High Contrast Gratings for the Spectrum Splitting Dispersive Element in a Concentrated Photovoltaic System
12:08

Fabrication of High Contrast Gratings for the Spectrum Splitting Dispersive Element in a Concentrated Photovoltaic System

Published on: July 18, 2015

Gradient-index filters: designing filters with steep skirts, high reflection, and quintic matching layers

H Fabricius

    Applied Optics
    |August 25, 2010
    PubMed

    More Related Videos

    Analyzing Mixing Inhomogeneity in a Microfluidic Device by Microscale Schlieren Technique10:12

    Analyzing Mixing Inhomogeneity in a Microfluidic Device by Microscale Schlieren Technique

    Published on: June 12, 2015

    Related Concept Videos

    Passive Filters01:27

    Passive Filters

    Passive filters are utilized to shape the frequency spectrum of signals across a diverse array of applications. These filters, using only passive elements like resistors (R), inductors (L), and capacitors (C), are capable of selectively allowing or blocking certain frequency ranges without the need for external power sources.
    Low-Pass Filters
    Low-pass filters are designed to transmit signals with frequencies lower than the cutoff frequency, ωc, and attenuate those above it. The cutoff frequency...
    Gradient Fields01:27

    Gradient Fields

    A gradient field is a vector field derived from a scalar field. A scalar field assigns a single numerical value to every point in space, such as temperature, pressure, or electric potential. The gradient field describes how that value changes from point to point. It gives both the direction of the fastest increase and the rate of change in that direction.For a scalar field f(x, y), the gradient is written as\begin{equation*}\nabla f=\left\langle \jfrac{\partial f}{\partial x},\jfrac{\partial...
    Active Filters01:25

    Active Filters

    Active filters are electronic circuits that use operational amplifiers (op-amps), resistors, and capacitors to filter out unwanted frequency components from a signal. A first-order low-pass active filter is designed to pass signals with a frequency lower than a certain cutoff frequency and attenuate frequencies higher than that cutoff frequency. The transfer function for a first-order low-pass active filter is:
    Design Example: Aggregate Gradation01:24

    Design Example: Aggregate Gradation

    The right type and quality of aggregates are crucial for concrete as they significantly influence its properties, mix proportions, and cost-effectiveness. If different sources are available for sand, the commonly used fine aggregate in concrete, the selection of sand is primarily based on its gradation.
    The grading, or particle-size distribution, of sand is determined using sieve analysis, with standard sizes ranging from 150 μm to 10 mm (ASTM No. 100 sieve to 3⁄8 in. sieve). Sand is sampled...
    Filtration00:53

    Filtration

    Filtration is a physical separation process that involves passing a suspension through a porous medium to separate solids from fluids. During filtration, solids collect on the porous medium while liquids, also collectively known as the filtrate, pass through. The filtration medium is selected based on the filtration purpose, quantity, and nature of the precipitate. The general criteria for a suitable filtering medium are that it is inert, mechanically strong, nonabsorbent toward dissolved...
    Gradient Vectors and Their Applications01:19

    Gradient Vectors and Their Applications

    Every point on a topographical map corresponds to a particular elevation, so the landscape can be modeled as a surface whose height depends on horizontal position. From any given location, a hiker may face infinitely many directions, but only one direction produces the fastest possible increase in elevation. This unique route is called the direction of steepest ascent, and in multivariable calculus, it is represented by the gradient vector of the elevation function.The gradient vector points...