Diameter modulation by fast temperature control in laser-assisted chemical vapor deposition of single-walled carbon nanotubes
Related Experiment Video
Updated: Jun 9, 2026

Dry Oxidation and Vacuum Annealing Treatments for Tuning the Wetting Properties of Carbon Nanotube Arrays
Published on: April 15, 2013
M Mahjouri-Samani1, Y S Zhou, W Xiong
1Department of Electrical Engineering, University of Nebraska-Lincoln, Lincoln, NE 68588-0511, USA.
Abstract:
Diameter modulation by fast temperature control in laser-assisted chemical vapor deposition (LCVD) was successfully achieved to tune the diameters of single-walled carbon nanotubes (SWNTs) in different segments. Due to the inverse relationship between the SWNT diameter and the growth temperature, SWNTs with ascending diameters were obtained by reducing the LCVD temperature from high to low. The diameter-modulated SWNTs were integrated in electrodes to form field-effect transistors (FETs) and to investigate their electronic transport properties. The SWNTs in the FET structures have electronic properties similar to Schottky diodes, indicating clear evidence of different bandgap structures at the two ends of the SWNTs. Raman spectroscopy, transmission electron microscopy, and electronic transport characteristics were studied to investigate the influence of temperature variation on the structural and electronic characteristics of the SWNTs.

