Related Experiment Video
Updated: Jun 8, 2026
Fabrication And Characterization Of Photonic Crystal Slow Light Waveguides And Cavities
Published on: November 30, 2012
Design and fabrication of a 200 GHz Si-nanowire-based reflective arrayed-waveguide grating (de)multiplexer with
Yaocheng Shi1, Xin Fu, Daoxin Dai
1Centre for Optical and Electromagnetic Research, State Key Laboratory of Modern Optical Instrumentation, Zhejiang University, 310058 Hangzhou, China.
Abstract:
A compact Si-nanowire-based reflective arrayed-waveguide grating (AWG) for dense wavelength-division multiplexing is proposed. At the end of each waveguide in the array, there is an individual photonic crystal (PhC) reflector, which makes the AWG layout design very flexible. All the PhC reflectors are with the same design. With such a design, the total size of the AWG (de)multiplexer is reduced by more than a half. The reflection efficiency of the used PhC reflectors is enhanced by optimizing the taper between the arrayed waveguides and the PhC reflector. A 200 GHz AWG (de)multiplexer is designed and fabricated as an example. The total size is only about 193 μm × 168 μm.
