Related Experiment Video
Updated: Jun 8, 2026

Designed for Molecular Recycling: A Lignin-Derived Semi-aromatic Biobased Polymer
Published on: November 30, 2020
In vivo behavior of trimethylene carbonate and ε-caprolactone-based (co)polymer networks: degradation and tissue
Erhan Bat1, Josée A Plantinga, Martin C Harmsen
1Department of Polymer Chemistry and Biomaterials, Faculty of Science and Technology, MIRA Institute for Biomedical Technology and Technical Medicine, University of Twente, PO Box 217, 7500 AE Enschede, The Netherlands.
Abstract:
The in vivo erosion behavior of crosslinked (co)polymers based on trimethylene carbonate (TMC) and ε-caprolactone (CL) was investigated. High molecular weight poly(trimethylene carbonate) (PTMC) homopolymer- and copolymer films were crosslinked by gamma irradiation. To adjust the in vivo erosion rate of the (co)polymer films, both the irradiation dose (25, 50, or 100 kGy) for PTMC and composition (100-70 mol % TMC) at a constant irradiation dose of 25 kGy were varied. After subcutaneous implantation of irradiated films in rats, their in vivo behavior was evaluated qualitatively and quantitatively. When the irradiation dose for PTMC was increased from 25 to 100 kGy, the erosion rate of nonextracted PTMC films (determined at day 5) decreased from 39.7 ± 16.0 μm day(-1) to 15.1 ± 2.5 μm day(-1), and the number of lymphocytes in the tissue surrounding the films decreased from 235 ± 114 cells mm(-2) to 64 ± 33 cells mm(-2). The number of macrophages and giant cells at the tissue-polymer interface also decreased with increasing irradiation dose. All (co)polymer films eroded completely within 28 days of implantation. Variation of the TMC content of gamma irradiated (co)polymer films did not affect the tissue response to the gamma irradiated (co)polymer films and their in vivo erosion behavior much.
Related Concept Videos
Types of Step-Growth Polymers: Polyesters
Polyesters are commonly prepared from terephthalic acid and ethylene glycol; the crude product is known as poly(ethylene terephthalate) or PET. However, polyesters are synthesized industrially by transesterification of dimethyl terephthalate with ethylene glycol at 150 °C. The two reactants and the polymer...
Classification and Mechanical Properties of Synthetic Polymers
Microbial Bioremediation of Plastics

