Related Experiment Video
Updated: Jun 8, 2026

Mesocosm-Scale Constructed Wetland Design for Wastewater Treatment
Published on: May 2, 2025
Operating boundaries of full-scale advanced water reuse treatment plants: many lessons learned from pilot plant
1Veolia Water Australia, Level 1, 20 Wharf Street, Brisbane, QLD 4000, Australia. cecile.bele@veoliawater.com.hk
Abstract:
Three Advanced Water Treatment Plants (AWTP) have recently been built in South East Queensland as part of the Western Corridor Recycled Water Project (WCRWP) producing Purified Recycled Water from secondary treated waste water for the purpose of indirect potable reuse. At Luggage Point, a demonstration plant was primarily operated by the design team for design verification. The investigation program was then extended so that the operating team could investigate possible process optimisation, and operation flexibility. Extending the demonstration plant investigation program enabled monitoring of the long term performance of the microfiltration and reverse osmosis membranes, which did not appear to foul even after more than a year of operation. The investigation primarily identified several ways to optimise the process. It highlighted areas of risk for treated water quality, such as total nitrogen. Ample and rapid swings of salinity from 850 to 3,000 mg/l-TDS were predicted to affect the RO process day-to-day operation and monitoring. Most of the setpoints used for monitoring under HACCP were determined during the pilot plant trials.
Related Concept Videos
Biological Treatment of Effluent and Waste Water
Scale-Up Processes
Microbial Wastewater Treatment
Bioreactor Design and Operational System
Upstream Processing
Biofuels

