Measurement of the 3D arterial wall strain tensor using intravascular B-mode ultrasound images: a feasibility study

Intravascular ultrasound (IVUS) elastography is a promising tool for studying atherosclerotic plaque composition and assessing plaque vulnerability. Current IVUS elastography techniques can measure the 1D or 2D strain of the vessel wall using various motion tracking algorithms. Since biological soft tissue tends to deform non-uniformly in 3D, measurement of the complete 3D strain tensor is desirable for more rigorous analysis of arterial wall mechanics. In this paper, we extend our previously developed method of 2D arterial wall strain measurement based on non-rigid image registration into 3D strain measurement. The new technique registers two image volumes acquired from the same vessel segment under different levels of luminal pressure and longitudinal stress. The 3D displacement field obtained from the image registration is used to calculate the local 3D strain tensor. From the 3D strain tensor, radial, circumferential and longitudinal strain distributions can be obtained and displayed. This strain tensor measurement method is validated and evaluated using IVUS images of healthy porcine carotid arteries subjected to a luminal pressure increase and longitudinal stretch. The ability of the algorithm to overcome systematic noise was tested, as well as the consistency of the results under different longitudinal frame resolutions.