Chromium recovery from tannery sludge with saponin and oxidative remediation

Two new methods for treatment of tannery sludge were studied to achieve cost-effective and environmentally acceptable remediation solutions for high chromium containing tannery sludge. Quillaja bark saponin, a plant derived biosurfactant, was applied to dewatered tannery sludge for chromium recovery and a comparative assessment with H(2)O(2) oxidative treatment method is presented. Tannery sludge samples were treated on a laboratory scale with saponin in the pH range 2-3. The effects of various factors like time, concentration of saponin, pH, and temperature on the extraction of chromium were studied. The treatment with saponin extracted 24% of Cr from tannery sludge at a pH around2, performing multiple wash of 6h, at 33 °C. On the other hand, the H(2)O(2) treatment, which include Cr(III) oxidation to Cr(VI) and extraction with sulfuric acid solution at pH 2, enabled to extract 70% of chromium within less than 4h at room temperature (21 °C). The results indicate that the extraction efficiency of saponin was strongly dependent on the organic matter content of the sample, which affects chromium mobility by its high adsorption capacity. On the other hand hydrogen peroxide treatment is effective and the duration of the process is short and requires cheap chemicals and moderate conditions.