Simultaneous determination of Cu(II), Ni(II) and Zn(II) by peroxyoxalate chemiluminescence using Partial Least...

It was found that the ions Cu(II), Ni(II) and Zn(II) can attenuate the peroxyoxalate chemiluminescence emission, which was used to develop an analytical procedure for the simultaneous determination of these ions in a stopped-flow system using Partial Least Square (PLS) calibration. Acetonitrile was used to dissolve TCPO and to prepare a mixture of fluorescein, H(2)O(2) and imidazole. These solutions were carried using two peristaltic pumps, while a third pump was employed to propel the aqueous solutions of the metallic ions. All solutions were mixed in the quartz cell of a Campsec CL detector connected to a personal computer to register the CL development using the Clarity software. Under the optimum operative conditions each ion produced a specific CL development with maximum intensities at 0.280 min for Zn(II), 0.307 min for Ni(II) and 0.327 min for Cu(II). The latter exhibited the highest inhibition effect. The experimental calibration set was composed of 16 sample solutions using a central design for three component mixtures with scaled values. The proposed method offers the advantages of simplicity, good precision and accuracy for the simultaneous determination of Ni(2+), Cu(2+) and Zn(2+) in water samples.