Characterization and identification of acrylic binding media: influence of UV light on the ageing process

This study characterizes and identifies two different acrylic binding media such as Plextol® D498 and Primal® AC33, which are widely used in modern and contemporary art. In order to investigate their fast photooxidative deterioration when exposed to ultraviolet (UV) light, ageing studies on these materials were carried out. For this purpose, pure synthetic materials but also mixed with different inorganic pigments were identified and characterized before and after UV exposure by means of pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS). Particular attention was paid to the comparison of two different analytical methods: (1) single-shot method based on a pyrolysis for the analysis of polymers and (2) double-shot method, which allows a unique combination of thermal desorption for the analysis of volatile compounds and pyrolysis of the polymers themselves. These analyses have been complemented by Fourier transform infrared spectroscopy-attenuated total reflectance (FTIR-ATR) studies. The comparison of the results obtained from unaged samples and UV-aged clearly showed material alterations as well as the formation of new products, which were recorded by FTIR-ATR. Generally, these changes were more pronounced when the acrylic binding media were mixed with pigments. The double-shot technique of Py-GC/MS additionally allowed the detection of the phenolic antioxidant in unaged Plextol® D498, but no oxidation products could be identified by Py-GC/MS in all samples.