Comparisons of electromagnetic and piezoelectric floating-mass transducers in human cadaveric temporal bones

Electromagnetic floating-mass transducers for implantable middle-ear hearing devices (IMEHDs) afford the advantages of a simple surgical implantation procedure and easy attachment to the ossicles. However, their shortcomings include susceptibility to interference from environmental electromagnetic fields, relatively high current consumption, and a limited ability to output high-frequency vibrations. To address these limitations, a piezoelectric floating-mass transducer (PFMT) has recently been developed. This paper presents the results of a comparative study of these two types of vibration transducer developed for IMEHDs. The differential electromagnetic floating-mass transducer (DFMT) and the PFMT were implanted in two different sets of three cadaveric human temporal bones. The resulting stapes displacements were measured and compared on the basis of the ASTM standard for describing the output characteristics of IMEHDs. The experimental results show that the PFMT can produce significantly higher equivalent sound pressure levels above 3 kHz, due to the flat response of the PFMT, than can the DFMT. Thus, it is expected that the PFMT can be utilized to compensate for high-frequency sensorineural hearing loss.