Related Experiment Video
Updated: Jun 6, 2026

20 mJ, 1 ps Yb:YAG Thin-disk Regenerative Amplifier
Published on: July 12, 2017
Required energy for a laser radar system incorporating a fiber amplifier or an avalanche photodiode
Abstract:
The transmitted energy required for an airborne laser radar system to be able to image a target at 20 km is investigated. Because direct detection is being considered, two methods of enhancing the received signal are discussed: (1) using an avalanche photodiode (APD) as the detector and (2) using a commercial fiber amplifier as a preamplifier before a photodetector. For this analysis a specified signal-to-noise ratio was used in conjunction with the radar range equation, which includes the effects of atmospheric transmission and turbulence. Theoretical analysis reveals that a system with a fiber amplifier performs nearly the same as a system incorporating an APD.
More Related Videos
Related Concept Videos
Raman Spectroscopy Instrumentation: Overview
The monochromatic laser source, typically using visible or near-infrared radiation, generates a highly focused beam of light. This light interacts with the molecules of the sample, scattering some of the light. Liquid and gaseous samples are usually tested in ordinary glass capillaries, while solids can be analyzed as powders packed in capillaries or as potassium...
Determination of Crystal Structures

