Related Experiment Video
Updated: May 1, 2026

Sediment Core Extrusion Method at Millimeter Resolution Using a Calibrated, Threaded-rod
Published on: August 17, 2016
Aerostat sampling of PCDD/PCDF emissions from the Gulf oil spill in situ burns
Johanna Aurell1, Brian K Gullett
1US Environmental Protection Agency, Office of Research and Development, National Risk Management Research Laboratory, Research Triangle Park, North Carolina 27711, United States.
Abstract:
Emissions from the in situ burning of oil in the Gulf of Mexico after the catastrophic failure of the Deepwater Horizon drilling platform were sampled for polychlorinated dibenzodioxins and polychlorinated dibenzofurans (PCDD/PCDF). A battery-operated instrument package was lofted into the plumes of 27 surface oil fires over a period of four days via a tethered aerostat to determine and characterize emissions of PCDD/PCDF. A single composite sample resulted in an emission factor of 2.0 ng toxic equivalency (TEQ) per kg of carbon burned, or 1.7 ng TEQ per kg of oil burned, determined by a carbon balance method. Carbon was measured as CO(2) plus particulate matter, the latter of which has an emission factor of 0.088 kg/kg carbon burned. The average plume concentration approximately 200-300 m from the fire and about 75-200 m above sea level was <0.0002 ng TEQ/m(3).
More Related Videos
07:24Combustion Chemistry of Fuels: Quantitative Speciation Data Obtained from an Atmospheric High-temperature Flow Reactor with Coupled Molecular-beam Mass Spectrometer
Published on: February 19, 2018
12:34Experimental Procedure for Laboratory Studies of In Situ Burning : Flammability and Burning Efficiency of Crude Oil
Published on: May 1, 2018
Related Concept Videos
Sampling Methods: Sample Types
Solid samples include a variety of substances, such as sediments from water bodies, soil, metals, and biological tissues. Two standard methods for extracting sediments from water bodies are grab sampling and piston coring. Grab sampling involves using a device to collect a discrete sediment sample from the bottom of a water body with minimal disturbance. Grab samples do not always represent the entire area due to...
Gas Chromatography: Types of Detectors-II
Flame Photometry: Overview
Flame Photometry: Lab