Related Experiment Video
Updated: Jun 6, 2026

Multimodal Nonlinear Hyperspectral Chemical Imaging Using Line-Scanning Vibrational Sum-Frequency Generation Microscopy
Published on: December 1, 2023
Lidar aerosol backscatter cross sections in the 2-νm near-infrared wavelength region
Abstract:
Lidar backscatter cross-sectional measurements at 1.064, 0.532, and 1.54 μm were acquired during November 1989 and May-June 1990 around the Pacific region by the NASA DC-8 aircraft as part of the Global Backscatter Experiment. The primary motivation for the Global Backscatter Experiment was the study of lidar backscatter cross sections for the development of a spaceborne wind-sensing lidar. Direct backscatter measurements obtained by the NASA Goddard Space Flight Center visible and infrared lidar are compared with backscatter cross sections calculated from aerosol size distributions obtained by particle counters. Results for one flight with pronounced aerosol layers in the upper troposphere southeast of Japan are presented. Because 2-μm region wavelengths are possible candidates for a spaceborne wind-sensing lidar, the visible and infrared lidar backscatter cross sections at 1.064, 0.532, and 1.54 μm are extrapolated to the 2-μm region. The extrapolated 2-μm cross sections are compared with lidar measurements at 9 μm. A significant range in the ratio of 2-9-μm backscatter cross sections is found, but a large number of points concentrate near ratios of three to ten. A large number of 1.064- and 1.54-μm cross sections were binned to provide an estimate of backscatter for various percentiles for the flight. The ratio of the 50-percentile backscatter values at 1.064 and 1.54 μm suggest a λ(-1.9) to λ(-3.0) wavelength dependence of aerosol backscatter cross section in the near infrared for the observational case.
Related Concept Videos
Attenuated Total Reflectance (ATR) Infrared Spectroscopy: Overview
The ATR process begins by directing a beam...
Infrared (IR) Spectroscopy: Overview
Different compounds display unique properties due to their...
Ultraviolet and Visible (UV–Vis) Spectroscopy: Overview
UV–Vis Spectroscopy: Beer–Lambert Law
Inductively Coupled Plasma Atomic Emission Spectroscopy: Instrumentation
There are three main types of inductively coupled plasma atomic emission spectroscopy (ICP-AES) instruments: sequential, simultaneous multichannel, and Fourier transform instruments, with the latter being less commonly used.
IR Spectrometers

