[Cr(VI) adsorption mechanism on rice husk ash burned at low temperature by method of IR spectra]

Boehm titration method was used to analyze functional groups on cell surface of rice husk ash burned at low temperature in the present paper. Effects of initial pH value and temperature on Cr(VI) adsorption were studied, adsorption capacity was tested with the help of kinetic models and adsorption isotherms, instruments of Fourier transform infrared spectroscopy(FTIR) and scanning electron microscope (SEM) were used to check characteristics and adsorption mechanism of Cr(VI). The results indicated that optimal removing rate was achieved at initial pH value 5, and pH values of aqueous solution changed little be fore and after adsorption process. The adsorbent of rice husk ash could remove Cr(VI) effectively, and the maximum removing rate could be 95% with Cr(VI) concentration 20 mg x L(-1) and achieve 1-2 level of state standard(GB8978-1996). The adsorption process fits pseudo-second-order kinetic model and Langmuir isotherm better, the maximum adsorption capacity of Cr(VI) was 3.2776 mg x g(-1). Results of FTIR showed that amide II band, Si--O--Si, O--Si--O were important for Cr(VI) removal. SEM micrographs revealed that series of needle-shaped precipitation appeared on cell surface, and inorganic precipitation mechanism and redox mechanism might work in the test. As a kind of low cost adsorbent, rice husk ash can be applied to remove heavy metals in environment with great potential.