Tertiary treatment of pulp and paper industrial wastewater by electro-Fenton process
1Centre for Environmental Studies, Anna University, Chennai-600 025, India.
Abstract:
The feasibility of decolourisation/degradation of secondary treated pulp and paper industrial wastewater was investigated by Electro-Fenton process. The wastewater was dark brown in colour, toxic odorous, having high COD (34,800 mg/L), BOD3 (4900 mg/L) and non-biodegradable (0.14--BOD3/COD ratio). The study was carried out to evaluate the effects of the operating variables, viz. pH, dosage of Fe2+, concentration of hydrogen peroxide, current efficiency and contact time. The kinetic results show pseudo-first order degradation, with a rate constant of reaction between CODt/COD0. The maximum colour removal up to 95% and COD removal upto 90% were obtained at pH 3, Fe2+ dosage 125 mg/L, concentration of H2O2, 1500 mg/L, applied current 2.2 A for 120 minutes of contact time. This feasibility study has proved that Electro-Fenton process could be an appropriate tertiary treatment for secondary treated pulp and paper industrial wastewater.
More Related Videos
09:49Use of a Battery of Chemical and Ecotoxicological Methods for the Assessment of the Efficacy of Wastewater Treatment Processes to Remove Estrogenic Potency
Published on: September 11, 2016
06:35Implementation of a Hyperbolic Vortex Plasma Reactor for the Removal of Micropollutants in Water
Published on: July 25, 2025
Related Concept Videos
Biological Treatment of Effluent and Waste Water
Microbial Wastewater Treatment
Microbial Fuel Cells
Coagulation
Downstream Processing
Acid Mine Drainage
