Bioimpedance: a novel method for the determination of extravascular lung water

Extravascular lung water (EVLW) can be measured using the double indicator dilution technique (DD). However, because this method is highly invasive and complicated, its clinical used has been limited. In theory, changes in thoracic conductivity, or bioimpedance (BI), can reflect changes in EVLW. However, past studies were unable to directly quantitate changes in EVLW since the contribution of dynamic variables such as ventricular volumes, hematocrit (HCT), and EVLW to this impedance signal could not be discerned. Recent studies have shown that a thermodilution pulmonary artery catheter mounted with a fast response thermistor accurately measures right ventricular end-diastolic volume (RVEDV). With changes in the RVEDV and HCT known, the contribution of EVLW to the bioimpedance signal may be isolated and used to more directly measure changes in EVLW. This hypothesis was tested by creating acute sepsis in seven pigs by infusion of Pseudomonas aeruginosa. Changes in EVLW from baseline were measured using DD at 30 min and at 1, 2, and 4 hr and compared with the change in EVLW computed from a mathematical model comprising the measured changes in BI, RVEDV, and HCT at the same time points. Changes in EVLW using DD and BI were significantly correlated over the length of the study (r = 0.85, P less than 0.01). In early sepsis (30 min), BI overestimated EVLW when compared with DD (P less than 0.05). However, at 1, 2, and 4 hr there was no significant difference between the two methods. In conclusion, the use of bioimpedance and a volumetric catheter may provide a relatively simple and reliable method for continuously monitoring changes in EVLW in the intensive care setting.