Related Experiment Video
Updated: Jun 6, 2026

08:57
Optical Trap Loading of Dielectric Microparticles In Air
Published on: February 5, 2017
Correction of low-frequency measurements of the quadratic electro-optic effect for electrostatic stresses
Applied Optics
|December 4, 2010
Abstract:
Electrostatic stresses that can influence the observed signal with stress-optical constants form a contribution to the quadratic electro-optic (Kerr) effect measured at low frequencies. A new formula is proposed to correct for the influence of these stresses in order to obtain the true Kerr constant.
Related Concept Videos
Electrostatic Boundary Conditions in Dielectrics
When an electric field passes from one homogeneous medium to another, crossing the boundary between the two mediums imparts a discontinuity in the electric field. This results in electrostatic boundary conditions that depend on the type of mediums the field propagates through.
Consider a case where both the mediums across a boundary are two different dielectric materials. Recall that the electric field and electric displacement are proportional and related through the material's permittivity.
Consider a case where both the mediums across a boundary are two different dielectric materials. Recall that the electric field and electric displacement are proportional and related through the material's permittivity.
Electrostatic Boundary Conditions
Consider an external electric field propagating through a homogeneous medium. When the electric field crosses the surface boundary of the medium, it undergoes a discontinuity. The electric field can be resolved into normal and tangential components. The amount by which the field changes at any boundary is given by the difference between the field components above and below the surface boundary.
The surface integral of an electric field is given by Gauss's law in integral form and is related to...
The surface integral of an electric field is given by Gauss's law in integral form and is related to...
Gauss's Law in Dielectrics
Consider a polar dielectric placed in an external field. In such a dielectric, opposite charges on adjacent dipoles neutralize each other, such that the net charge within the dielectric is zero. When a polar dielectric is inserted in between the capacitor plates, an electric field is generated due to the presence of net charges near the edge of the dielectric and the metal plates interface. Since the external electrical field merely aligns the dipoles, the dielectric as a whole is neutral. An...

