Regenerable Fe-Mn-ZnO/SiO2 sorbents for room temperature removal of H2S from fuel reformates: performance, active...

Fe- and Mn-promoted H(2)S sorbents Fe(x)-Mn(y)-Zn(1-x-y)O/SiO(2) (x, y = 0, 0.025) for desulfurization of model fuel reformates at room temperature were prepared, tested and characterized. Sulfur uptake capacity at 25 °C significantly exceeds that of both commercial unsupported ZnO sorbents and un-promoted supported ZnO/SiO(2) sorbents. Sulfur capacity and breakthrough characteristics remain satisfactory after multiple (∼10) cycles of adsorption/regeneration, with regeneration performed by a simple and robust heating in air. XRD shows that both "calcined" and "spent" sorbents contain nano-dispersed ZnO, and XPS confirms conversion of ZnO to ZnS. "Calcined" sorbent contains Fe(3+) and Mn(3+) that are reduced to Mn(2+) upon reaction with H(2)S, but not with H(2). Operando ESR is used for the first time to study dynamics of reduction of Mn(3+) promoter sites simultaneously with measuring sulfidation dynamics of the Fe(x)-Mn(y)-Zn(1-x-y)O/SiO(2) sorbent. Fe cations are believed to occupy the surface of supported ZnO nanocrystallites, while Mn cations are distributed within ZnO.