Related Experiment Video
Updated: Jun 6, 2026

Development and Validation of Chromium Getters for Solid Oxide Fuel Cell Power Systems
Published on: May 26, 2019
Synthesis, hydration and durability of rice hull cements doped with chromium
Renato P Amorim1, Mariane S Miranda, Meiri B R Oliveira
1Laboratório de Materiais e Superfícies (LABMAR), Universidade de Mogi das Cruzes (UMC), Mogi das Cruzes, SP, Brazil.
Abstract:
This work describes the synthesis, hydration and durability behavior of β-Ca(2)SiO(4) doped with chromium. β-Ca(2)SiO(4) is a component of commercial cement. Rice hull is an agricultural residue containing about 10% of silica as inorganic constituent. The controlled burning of rice hull was used to obtain this biogenic silica, used as starting material. In many situations chromium is added during cement preparation in order to promote encapsulation, at temperatures around 1500°C. The synthesis presented here is completed at 800°C, causing a substantial reduction in energy consumption. Moreover, chromium is chemically bonded to cement crystal, which is safer than simple physical encapsulation. Results show that chromium can be inserted into the structure of β-Ca(2)SiO(4) up to 1% (molar ratio). Hydration degree and durability studies show that insertion of chromium causes no deleterious effects on physical and chemical properties of these doped materials when compared to β-pure Ca(2)SiO(4).
Related Concept Videos
Hydration of Cement
Strength and Heat of Hydration
The heat of hydration for each cement compound is significant; for instance, tricalcium aluminate (C3A) and...
Superplasticizers
Retarders
The function of retarders is to delay the setting of concrete, and this effect can be measured using a penetration test. The retardation process involves adding...
Aggregate Cement Ratio
Types of Cement I
Type I (Ordinary Portland Cement) is widely used for general construction where special properties are not required. It has moderate sulfate resistance and heat of hydration.
Type II (Modified Cement) offers moderate resistance to sulfate attack and a lower rate of heat development compared to Type I. It is suitable for structures in...

