Related Experiment Video
Updated: Jun 5, 2026

Combining Raman Imaging and Multivariate Analysis to Visualize Lignin, Cellulose, and Hemicellulose in the Plant Cell Wall
Published on: June 10, 2017
Examination of cellulose textile fibres in historical objects by micro-Raman spectroscopy
1Institute for the Protection of Cultural Heritage of Slovenia, Restoration Centre, Poljanska 40, Ljubljana, Slovenia. katja.kavkler@rescen.si
Abstract:
The investigation and characterisation of historical objects can be an exacting piece of work because of the small quantity of material that can be investigated and the degradation of the material and its value, which sometimes demands only non-destructive methods. In this study, as one such method, Raman spectroscopy was used to investigate the cellulose fibres of painting canvases and linings. Historical samples of fabrics were taken from different paintings and their linings from different locations in Slovenia. Raman spectra were recorded on the fibres of these historical samples. Additionally, a database of the Raman spectra of modern cellulose fibres was created and compared with the literature data. Differences in the Raman spectra of different cellulose fibres were observed, and on this basis fibres of different types were discriminated. The recorded Raman spectra of historical samples were compared with the database spectra of modern cellulose fibres. Strong luminescence effects because of the changes caused by ageing, degradation products and surface contamination caused difficulties in interpreting the Raman spectra of historical fibres. The luminescence effects were partly overcome by prolonged exposition times and previous "signal quenching" with the laser. The Raman spectra of historical cotton showed no luminescence effects, and only slight differences to the reference spectra of modern cotton fibres appeared, whereas the Raman spectra of historical flax fibres were overwhelmed with luminescence and showed changes in spectra through degradation. The research showed that by using Raman spectroscopy the identification and differentiation of different cellulose fibres and materials that accompany cellulose in the fibres are possible and that degraded and aged material can be differentiated.
Related Concept Videos
Raman Spectroscopy Instrumentation: Overview
The monochromatic laser source, typically using visible or near-infrared radiation, generates a highly focused beam of light. This light interacts with the molecules of the sample, scattering some of the light. Liquid and gaseous samples are usually tested in ordinary glass capillaries, while solids can be analyzed as powders packed in capillaries or as potassium...
Raman Spectroscopy: Overview
However, a small fraction of the scattered light exhibits a frequency shift due to the exchange of energy between the incident photons and the...

