Related Experiment Video
Updated: Jun 5, 2026

Surface Properties of Synthesized Nanoporous Carbon and Silica Matrices
Published on: March 27, 2019
Evaluation of asphaltene degradation on highly ordered TiO2 nanotubular arrays via variations in wettability
1Department of Chemical and Materials Engineering, University of Alberta, Edmonton, Alberta, Canada T6G 2V4.
Abstract:
Photocatalytic degradation of both aquatic and atmospheric organic pollutants on titanium dioxide has been extensively investigated in the past decades, but research on direct photocatalytic degradation of solid-phase organic pollutants is rather limited. In this work, photocatalytic degradation of n-C(7) asphaltene, which is composed of solid-phase organic substances found in crude oil, on highly ordered TiO(2) nanotubular arrays (TNAs) was studied using the wettability as an indicator. It was observed that the water contact angle rose linearly with increasing the concentration of n-C(7) asphaltene solution up to 0.02 g mL(-1). Further increasing the concentration of n-C(7) asphaltene only caused small augment in the contact angle, which eventually became stable around 98°. It is demonstrated that the water contact angle can be used as an indicator to reflect the residual solid-phase organic pollutants within a certain range of pollutant concentration. As observed, n-C(7) asphaltene film degraded on TNAs under UV illumination for 60 min, showing complete mineralization of ∼80% of n-C(7) asphaltene that was released into air finally. The remaining 20% of asphaltene was partially decomposed into smaller organic molecules, e.g., -C(═O)- and -C(═O)-OH, confirmed by high-resolution X-ray photoelectron spectra analysis. TNAs can be reused to degrade the solid-phase n-C(7) asphaltene for a number of cycles without further treatment.

